This new design of pink noise generator meets the requirements from the latest standard requirements for pink noise in IEC 60 065/2001. It has also other options included in the standard version se below.

Especially developments for ”cinema amplifiers”  - also used in homes
are a new range of application when you need 2 channels/phase 90 deg.

• Pink Noise  according to IEC 60 065/2001  + sine wave 1000 Hz.
• Two output channels when testing ”cinema amplifiers” for noise. The channels can be phase shifted to  0 deg. or 90 deg. between them.
• Amplitudes of sine wave and pink noise follow this table

• Outputs three levels:	Sine wave 1 kHz	Filtered pink noise
  Low:	0-100 mV/1 kohm	0-35 mV rms/1 kohm
  Medium:	0-1 V/1 kohm	0-350 mV rms/1khom
  High:	0-5 V/1 kohm	0-1,7 V rms/1kohm

• The generator can be used for noise  or sine wave (not two types at the same time)
• Fine: Fine adjustments of output voltage
• Out put connects: RCA or Banana type.
• Calibration report included.
• Dimensions: W= 29 cm; D=27 cm; H=6 cm
• There are no service adjustments inside the cabinet.